Victron Energy LFP-BMS12.8/60

Victron Energy LFP-BMS12.8/60

Victron Energy BAT512060410 12.8V 60Ah Lithium Iron Phosphate (LiFePO4) Rechargeable Lithium Smart Battery with Integrated Cell Balancing and Cell Monitoring

Important Information:

Victron Energy LFP batteries have integrated cell balancing and cell monitoring.

Up to five batteries can be paralleled and up to four batteries can be series connected, so that a 48V battery bank of up to 3000Ah can be assembled.

The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS) with two M8 circular connector cord sets.

The most Popular BMS is the VE Bus BMS This BMS can be used to control VE bus devices such as the Victron Inverter Charger range. 

If not connecting to a victron inverter charger use the smallBMS  

*See product manual for more information

High capacity 12.8V 60Ah Lithium Iron Phosphate (LiFePO4) smart battery module with built-in Bluetooth

With bluetooth capabilities, users can monitor their Victron LiFePO4 battery through the Victron Connect app (available for iOS and Android).

For Optimum efficiency, always update to the latest firmware using the Victron Connect app prior to installation.

Specifications:

  • Cycle life: 2500 cycles (80% DoD), 3000 cycles (70% DoD), 5000 cycles (50% DoD)
  • Max. continuous discharge current: 120A
  • Recommended continuous discharge current: ≤60A
  • End of discharge voltage: 11V
  • Charge voltage: 14.0V - 14.4V (14.2V recommended)
  • Float voltage: 13.5V
  • Max. charge current: 180A
  • Recommended charge current: ≤30A
  • Operating temperature: -20°C to +50ºC
  • Storage temperature: -45°C to +70ºC
  • Humidity (non-condensing): max. 95%
  • Protection class: IP22

 

Consider implementing Victron Energy's range of Lithium Iron Phosphate modules in high energy demand applications:

  • More RUGGED compared to lead acid batteries. 

LiFePO4 batteries do not need to be fully charged all the time. A partial charge may even slightly improve service life. In addition, LiFePO4 batteries have a wider operating temperature range, excellent cycling performance, lower internal resistance and higher rate of efficiency than lead acid batteries.

Lead acid batteries will fail prematurely due to sulfation if the battery is rarely, or never at all, fully charged or if the battery is stored for long periods partially or fully discharged. 

  • Higher ENERGY EFFICIENCY than lead acid batteries.

Round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of LiFePO4 batteries is 92% compared to lead acid batteries at around 80%. In off-grid applications like solar and/or wind, better energy efficiency means less energy loss.

  • SMALLER and LIGHTER than lead acid batteries.

LiFePO4 batteries are up to 70% smaller and 70% lighter than equivalent lead acid batteries.

SHARE:
Selling Unit EACH
Model No LFP-BMS12.8/60
Brand Victron Energy brand logo
Original Brand Victron Energy BAT512060410
Description Victron Energy BAT512060410 12.8V 60Ah Lithium Iron Phosphate (LiFePO4) Rechargeable Lithium Smart Battery with Integrated Cell Balancing and Cell Monitoring
Chemistry Lithium Iron Phosphate
Voltage 12.8V
Watt Hour 768Wh
Nominal Capacity 60Ah
Maximum Continuous Discharge Current 120A
Termination M8
Width 285mm
Height 240mm
Length / Breadth / Depth 132mm
Weight 12000g
Categories Lithium Ion Batteries
Lithium Iron Phosphate Battery Packs
12 Volt Series LiFePO4
LiFeP04 Battery Solutions
Victron LFP-BMS Smart Lithium
Lithium Iron Phosphate Modules
Data Sheet Datasheet PDF Thumbnail icon

Login to MI Link for pricing
Login for Pricing
MI Link is a dealer-only portal. If you are not a current MI account holder register for an account

Shipping restrictions Class 9 Dangerous Goods icon

SHIPPING RESTRICTIONS APPLY

Due to IATA and individual airline regulations, this item may only be shipped by surface (road/sea) freight.

UN3480 FULLY DECLARED CLASS 9 DANGEROUS GOODS LITHIUM ION BATTERIES - Contains cells/batteries packed in accordance with Packing Instruction P903 from ADG 7.7 & IMDG Code 2020. Surcharges will apply.

Further information on freight & postal regulations for lithium / lithium-based and other battery chemistries can be found on our battery transportation page.

Victron Connect app compatible

VictronConnect Compatible

VictronConnect lets you get live status information and configure any Victron Energy products via either Bluetooth or direct cable connection. Connect to Bluetooth equipped products, or non-Bluetooth equipped products using VE.Direct Bluetooth Smart Dongle. Connect directly to equipment using the VE.Direct to USB Interface (USB Type-A) or VE.Direct to Type C Interface (USB Type-C) cables.

Find out more about VictronConnect here, or download the App via these links. Click here to download the VictronConnect Manual.

Apple App Store

Apple Mac store

Google Play Store

Windows Download

Back to the top of page MI Link Contact Us