Victron Energy PPP-30

Victron Energy PPP-30

Victron Energy PPP012030000 12.8V 30Ah Lithium Iron Phosphate (LiFePO4) Peak Power Pack (PPP) for High Rate Discharge Output up to 150A Continuous / 200A Pulse (10sec)

High rate 12.8V 30Ah Lithium Iron Phosphate (LiFePO4) battery module features high rate discharge output while also having built-in protection against excessive battery discharge.

Perfect for use in "movers" - caravan manoeuvring systems - and other energy-intensive applications. Suitable for caravans above 1000kg. For lighter caravans see 8Ah Victron model. 

Features:

  • Lightweight and easy to install. Ideal for mobile applications.
  • Effective protection against improper use. Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries.
  • Dual output:
    • Output 1: high capacity output for caravan movers
    • Output 2: low capacity output for domestic low DC loads, eg: lighting, audio/video/ pumps, fridges (NOT available on 8Ah model)
  • Dual input:
    • Input 1 “car/solar”: charging while driving or charging with a solar panel. Equipped with voltage and current control for safe charging. In fact, any source of electric power can be connected to this input (e.g. a dynamo or a battery charger), as long as 11V < Vin < 25V. The current limitation is automatically set to a safe value.
    • Input 2 “adapter”: the adapter supplied can be connected to this input. Battery charging current: 3A, and suitable for 110/230V power supply.
  • Storage mode - Reduces power consumption to almost zero. Prevents damage by excessive discharge of the battery during storage.
  • Remote control with status indicator. Push button (supplied) with a dual-colour LED status indicator:
    • Short push of the button: high capacity output activated for 30 minutes (mover applications), LED red.
    • Hold down for 2 seconds: high capacity output always activated, LED red, slow flashing.
    • Hold down for 5 seconds: storage mode, LED blue, flashes 10 times.
    • Battery is charged via input 1, LED blue, slow flashing.
    • Battery fully charged, LED blue.
    • Overload or overheating, LED red, flashes.
  • VE.Direct port: can be connected to a PC or smartphone ('VE.Direct to USB' or 'VE.Direct Bluetooth Smart dongle' required). 
    • Simple operation:
      • Output 1: on / 30-minute timer / off
      • Output 2: on/off
      • Input 1: on/off
    • Scanning:
      • Battery voltage
      • Temperature and alarms


Specifications:

  • Output 1 (mover):
    • Continuous output current: 150A
    • Maximum output current (10 seconds): 200A
    • Short-circuit current: 300A
    • Safety features: Overload, short-circuiting, temperature, excessive discharge
    • Maximum charging current: 15A (no protection)
    • Recommended charging voltage: 14V (no protection)
    • Maximum charging voltage: 14.2V (no protection)
    • Maximum cable diameter: 16mm² (screw clamps)
  • Output 2 (domestic):
    • Continuous output current: 30A
    • Maximum output current (10 seconds): 50A
    • Short-circuit current: 80A
    • Safety features: Overload, short-circuiting, temperature, excessive discharge
    • Maximum charging current: 10A (no protection)
    • Recommended charging voltage: 14V (no protection)
    • Maximum charging voltage: 14.2V (no protection)
    • Maximum cable diameter: 6mm² (screw clamps)
  • Input 1 (car/solar): 
    • Input voltage range: 11 V < Vin < 25 V
    • Current limitation: 7A
  • Input 2 (adaptor):
    • Output voltage: 15V
    • Output current: 3A
    • Input voltage: 110 / 230 V 50 / 60 Hz
  • Temperature (charging and discharging not possible outside the given temperature range):
    • Charge: 0°C to +40ºC
    • Discharge: -20°C to +40ºC
    • Storage: -20°C to +40ºC

Comes with:

  • Power Supply
  • Embedded LiIon battery charger
  • Camper attachments
  • Cable with Push Button
  • Main Power Input cable to charger

SHARE:
Selling Unit EACH
Model No PPP-30
Brand Victron Energy brand logo
Original Brand Victron Energy PPP012030000
Description Victron Energy PPP012030000 12.8V 30Ah Lithium Iron Phosphate (LiFePO4) Peak Power Pack (PPP) for High Rate Discharge Output up to 150A Continuous / 200A Pulse (10sec)
Application Caravan Manoeuvring Systems and other Energy-Intensive Applications
Chemistry Lithium Iron Phosphate
Voltage 12.8V
Watt Hour 384Wh
Nominal Capacity 30Ah
Maximum Continuous Discharge Current 150A
Maximum Pulse Discharge Current 200000mA
Width 190mm
Height 172mm
Length / Breadth / Depth 172mm
Weight 5400g
Categories Lithium Ion Batteries
Lithium Iron Phosphate Battery Packs
12 Volt Series LiFePO4
LiFeP04 Battery Solutions
Victron Peak Power Packs
Peak Power Packs
Lithium Iron Phosphate Modules
Data Sheet Datasheet PDF Thumbnail icon Datasheet PDF Thumbnail icon

Login to MI Link for pricing
Login for Pricing
MI Link is a dealer-only portal. If you are not a current MI account holder register for an account

Shipping restrictions Class 9 Dangerous Goods icon

SHIPPING RESTRICTIONS APPLY

Due to IATA and individual airline regulations, this item may only be shipped by surface (road/sea) freight.

UN3480 FULLY DECLARED CLASS 9 DANGEROUS GOODS LITHIUM ION BATTERIES - Contains cells/batteries packed in accordance with Packing Instruction P903 from ADG 7.7 & IMDG Code 2020. Surcharges will apply.

Further information on freight & postal regulations for lithium / lithium-based and other battery chemistries can be found on our battery transportation page.

Back to the top of page MI Link Contact Us