Charge Test
Objective
Fast charge a battery in a monitored environment. In addition, we can charge battery to the required level for the particular purpose, for example storage.
Procedure and Standard
After identifying the maximum charge current from the battery specification, a charge cycle is applied to the battery. The charge cycle is applied to the battery. The charge cycle is featured with automatic fully charge detection, temperature monitored and controlled, safe termination under all conditions.
Equipment
Please see the following table:
| Cadex C7x00-C | Cadex C8000 | Vencon UBA | |
|---|---|---|---|
| Charge Current | 100mA - 4A | 30mA - 20A | 12mA - 3A |
| Battery Voltage | 1.2V - 36V | 1.2V - 36V | 1.2V - 44V |
| Battery Test Range | up to 24Ah | 50mAh - 100Ah | 20mAh - 120Ah |
| Chemistry (Rechargeable) | All | All | All |
| Temperature Controlled | Yes | Yes | Yes |
| V Detection for NiCd/NiMH | Yes | Yes | Yes |
Result Sample
The detail display shows the cell voltage, current in mA and battery tempreature and duration of charging. The duration of fully charging a rechargeable battery is:
- 1.5 hours for NiCd and NiMH
- 10 horus for SLA
- 4 hours for Lithium type chemistries
